MakersCONTROLLER and MakersDRIVERS coming!

Coming Soon: MakersDRIVER

[IMAGE:13355]
MCCLANDY's 150 gallon mixed reef with 120 cree leds, 6 makersdrivers, and two four foot heatsinks, MakersLED hanging kits.

The MakersDRIVER takes building finished DIY LED fixtures to a new level by simplifying power connections and providing multiple options for dimming control.

The MakersDRIVER utilizes an inexpensive 48V DC power source to drive up to 28 LEDs, a fan, and an optional controller. It provides 2 dimming channels, each capable of driving 14 LEDs. The MakersDRIVER incorporates user-replaceable Meanwell LDD series LED drivers. Dimming options include integrated knobs, 0-10V input, and a serial data interface.

Pre-Order Today at LEDGroupBuy.com

PRODUCT: http://makersled.com/?p=802
VIDEO: http://www.youtube.com/watch?feature=player_embedded&v=gLuUIJwtjOU

Included:
MakersDRIVER Board, Plastic Housing, Knobs
2 Meanwell LDD 1000mA LED Drivers
Stainless Docking Hardware

Features:

■Docks into the MakersLED Heatsink
■Drives up to 28 3v LEDs at 1000mA (45V available per channel)
■2 channels of dimming (14 LEDs/channel)
■Manual Dimming Interface
■Multiple External Control options available:
■Accepts 0-10V DC Analog lighting control signal (compatible with DIM4)
■Data Interface with MakersCONTROLLER lighting controller (coming soon)
■Daisy chain multiple MakersDRIVERS for single point of control with timed dimming
■Powers one 12v Fan (no extra fan power supply needed!)
■Fan failure detection – Flashes LEDs to alert failure (if fan is detected upon start-up)
■Sockets provided for Meanwell LDD drivers allow for removal (upgrade and replacement)
■Includes 2 1000mA Meanwell LDD Drivers (Compatible with 700mA LDD drivers)
■Utilizes inexpensive 48V DC power supplies (not Included)
■Fused, Reverse polarity protection
■Docks into 1ft or greater MakersLED heatsinks with space for a fan
■90 Day Warranty*
Not Included:
Heatsink, 48V Power Supply, Wire/cables, Fan, LEDs.
Specifications are subject to change. Estimated shipping date is April 17.

 

I will be attending Spring fest. But we didn't get a booth. If anyone is interested, i may be able to bring something for show and tell!

 

We were under the impression that there was only space at the hobbyist section.