1. Do you have an old account but can't access it?


    See Accessing your GIRS Account or Contact Us - We are here to help!

Various Items For Sale - Vortechs - Return Pumps - Lighting, etc - Updated 9/12

Discussion in 'Buy/Sell/Trade' started by AJ, Sep 11, 2010.

  1. AJ

    AJ Inactive User

    Ratings:
    +0 / 0 / -0
    OK...got a few items for sale...I've tried to put as much information about the items as possible including the specifications and their condition, but if you have questions, feel free to ask.  Pictures will be added later tonight.  All items can be shipped at buyer expense.  Some of the descriptions say see pics...pics for all items will be added later tonight.
    Three Hydor Koralia K4 Powerheads (1 Sold) - Brand new in box - these powerheads have never touched water.  Specs below picture. - $40 or $75 for both
    [​IMG]

    Flow Rate: 1,200 gph
    Power Consumption: 8.5 W
    Dimensions: 3 1/4" x 6 1/4"
    (SOLD)Two 12" Spider reflectors with Mogul sockets - good, not perfect condition.  There's a few marks on each and some light scratches on the inside edge of one of the reflectors.  See pics.  $10 each.
    [​IMG][​IMG]
    Gen-X PCX 40 External Pressure Rated Water Pump - this pump is comparable to the Iwaki 55RLT - specs are as follows - $80


    • Non-corrosive polypropylene housing
      Non-leak sealless pump
      Highly efficient, economical type
      Single phase motor with thermal protector
      Allowable ambient temperature: 0 to 40C
      Pumps are gravity feed design
      Not allowed to run dry
      Designed for both fresh & saltwater aquariums
      Max Flow: 1190gph
      Max Head: 22ft / 6.8m
      Speed: 3000rpm
      Fittings (Inlet/Outlet): 3/4in MPT / 3/4in MPT
      Economical to run-1.2amps,110Volts
      Quiet,cool running,no oiling required.
      PSI rating 10
    [​IMG][​IMG]

    Tom Aquatics Flow Meter - Needs to be cleaned - I have no idea if or how well it works - $3
    Water Storage and Mixing Station - This water storage and mixing station mixes cost effective design with high functionality.  It uses Rubbermaid trash cans for water storage, however, it's more than just a couple of garbage cans.  It includes a industrial type float valve that you can hook up to your RO/DI system to always keep plenty of RO/DI water on hand.  There's a wood stand that allows you to stack the two cans to maximize your space.  The can used for water storage goes on the stand so that you can drain water from that can into the can below for mixing with salt.  The top can has a bulkhead , ball valve and plumbing installed so you can easily drain the water from the top can into the bottom can.  The bottom can has wheels on it so you can store/mix your water in one room, and when it comes time to use it, move the water to the location where you want it.  Add a heater and a pump to mix the water/pump the water out (heater and pump are not included) and your water storage and mixing station is complete. Price out the components of this system and you'll see that it's deal.  - $75
    Red Sea Wavemaster Pro - This microprocessor controlled device controls four power heads in one of four different selectable modes - rolling, gentle, turbulent, or alternating.  If you're looking to get some more random flow in your tank but aren't interested in paying the price for EcoTech or Tunze controllable pumps, this might just be the option you've been looking for.  Instruction manual can be found here:  http://www.redseafish.com/languages...%5C184.pdf - $50
    [​IMG][​IMG][​IMG]
    (SOLD via RC)Algaefree Hammerhead magnetic glass cleaner - These super-strong magnets are about the best you can buy for cleaning your glass.  Some other magnetic glass cleaners don't get the job done because their magnets are not strong enough, but you don't have to worry about that with the Algaefree cleaners.  Also, the outside piece is sealed oak so you don't have to worry about the big white plastic brick on your glass like with the other brands.  The pad on this are getting close to needing to be replaced, but are certainly functional.  Inexpensive replacement pads are available online. I have one of these for my display tank and I love it. - $35
    [​IMG][​IMG]
    (SOLD)Two Ecotech MP40w Vortech pumps - These pumps are Generation 2 pumps with the WWD drivers, not the ES drivers.  These include the original boxes, manuals, foam covers for the wetsides, mounting plates and zip ties, and of course, all components of the pump.  These are in excellent condition, have been fully cleaned and are ready to be put into your tank.  I have four of them on my main display tank and absolutely love them.  Pics below show all items in the condition that you will receive them.  Note that these are all items for both pumps so if you just buy one, you will get 1/2 of the items pictured.  Also, on the box, notice the silver seal.  This indicates that they are Generation 2 pumps.  The Generation 2 pumps feature improvements from Generation 1 in that the magnets have a better coating on them and withstand being submersed in saltwater better, improved bearings, upgraded firmware, etc.  Specifications listed below pictures.  $275 each or $525 for both.
    [​IMG][​IMG][​IMG][​IMG][​IMG]

    Flow: 500-3000 gallons per hour
    Power Consumption: 12-35 watts
    Maximum Motor Temperature: 50-60 degrees Celsius
    Aquarium Wall Thickness Range: 3/16”-3/4”
    Appropriate Tank Size Range: 20-500+ gallons
    Dimensions: Wet Side- 3” diameter by 2.25” long, Dry Side- 3” diameter by 2.25” long
    Clearance Needed Behind Aquarium: 3”

    (SOLD)Two 16" Spider reflectors - one with a Mogul socket, one without.  These are in OK condition.  The have some hooks on the back side of them and some putty on the reflector side of them covering the other side of the hook so it didn't rust.  Might be good for a frag tank or something.  See pics.  Both for $15.
    [​IMG][​IMG]
    (SOLD)Quiet One 4000 Submersible Water Pump - This pump needs a new ceramic shaft which will cost about $20.  I'm asking $15 for the pump so your total cost to get it running should be about $35.  It's in perfect shape cosmetically.  Specs are as follows


    • Flow Rate: 1017 gph
      Inlet / Outlet: 1" MPT x 1" MPT
      Dimensions: 4.25" x 3.75" x 4"
      Max Head: 10.2 ft
      Power Consumption: 50W
    [​IMG][​IMG]
    (SOLD)AW-20 Aqualifter
    pump - Need I say more?  Pretty much the standard aqualifter pump that I've seen most people use.  It appears the cord has been repaired at one point as it has electricians tape on it.  - $7
    [​IMG]
    (SOLD) Danner MAG 9.5  Submersible Water Pump - As you can see in the pic, there's some kind of stain of some sort (looks more like a glue or paint) that got on the pump.  It does not impact functionality.  $50
    [​IMG][​IMG]
     
  2. rc1214b

    rc1214b

    256
    Ratings:
    +0 / 0 / -0
    You've got 6 Vortechs? Were these upgrades or w's from the start?
     
  3. AJ

    AJ Inactive User

    Ratings:
    +0 / 0 / -0
    The two that are being sold here were purchased as Gen 2 units...no upgrades have been done.   These were purchased as part of a larger acquisition and I've never had them running in my tank, however, I did see them running and they ran without any issues. 
    Mine (the four that I have on my tank) were all upgraded from Gen 1 units or MP20s.  I'm selling these because these are the ones that have the boxes and
    everything, and my upgraded units are working just fine for me.
    --AJ
     
  4. diablo30xp

    diablo30xp Inactive User

    50
    Ratings:
    +0 / 0 / -0
    a few questions about the Two 12" Spider reflectors with Mogul sockets. The moguls what wattage can u use for them and how much for shipping to 52732. As well if i can use 175watt bulbs i will take them if u can hold them till thursday thats when i get paid?
     
  5. AJ

    AJ Inactive User

    Ratings:
    +0 / 0 / -0
    I'm no expert on this stuff, but I believe that a mogul socket is just like a regular light socket in that it doesn't matter what wattage you put thru it. What matters is matching your ballast to your bulb.

    As for shipping, I can't give an exact quote, but I would expect it to be less than $10...more for the size of the box than the weight. They would be packed well, and shipped via the least expensive carrier, either USPS or FedEx.

    If you want them, I would need at least a partial payment now to hold the item. It's unfortunate, but when you have a few people tell you that they will buy something, then never pay for it and pick it up, it ruins things for everyone else. The reflectors would be shipped after payment for the reflectors and shipping was paid in full. Contact me via PM for payment options.

    --AJ
     
  6. diablo30xp

    diablo30xp Inactive User

    50
    Ratings:
    +0 / 0 / -0
    Thx very understandable about the holding, right now i just don't have the money to put down to hold. Well hopfully u will still have them on thursday if not its all good. Thx for the info as well. I will be from time to time to c if u still have them. I have been looking for something like these i am trying to upgrd from t5 and always wanted to go mh. Thx again.
     
  7. AJ

    AJ Inactive User

    Ratings:
    +0 / 0 / -0
    Local buyers, hurry up if you're interested...the rest is going on RC tomorrow.

    --AJ
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.